产品介绍：
产品说明
一般描述
This product is grey colored screen printable polymer dielectric, suitable for defining electrode areas and forms a protective layer over the electrode tracking during immersion of the electrode.
应用
Polymer dielectric grey for screen printing can be used for a variety of applications such as ink in the design of MRI receiving coils, organic light emitting diodes (OLEDs) and organic thin film transistors (OTFTs).
特点和优势
The formulation is designed for maximum flexibility.
制备说明
Screen Printing Equipment: semi-automatic, automatic.
Ink Screen Life: >3 hours
Screen Types: stainless steel, polyester mesh 156-325 tpi
- Typical Drying Conditions: Dry at 80 ℃ for 30 minutes, or 130 ℃ for 10-15 minutes in a box oven
- Suitable for Jet drying, infra-red and drying in high speed
- reel-to-reel
Substrate: polyester, PVC, polycarbonate, ceramic or alumina
法律信息
Product of Gwent Electronic Materials Ltd (GEM), part of Sun Chemical Corporation
基本信息
| NACRES | NA.23 |
产品性质
| 描述 | Coverage: 305 cm2 per g (using a 230 mesh stainless steel screen with 13 micron emulsion) Solvent Resistance: THF − Attack Solvent Resistance: Acetone − Attack Solvent Resistance: DMAC − Attack Solvent Resistance: DMF− Attack Solvent Resistance: MEK − Full attack |
| 形式 | paste |
| 组成 | Solid content, 50-55% (at 150 ℃) |
| 粘度 | 12.0-16.0 Pa.s (Haake RS1 C20/2° TiL at 230 sec-1 at 25 ℃) |
安全信息
| 象形图 |  |
| 警示用语： | Warning |
| 危险声明 | H319 |
| 预防措施声明 | P264 - P280 - P305 + P351 + P338 - P337 + P313 |
| 危险分类 | Eye Irrit. 2 |
| 储存分类代码 | 10 - Combustible liquids |
| WGK | WGK 3 |
| 闪点(F) | 191.3 °F |
| 闪点(C) | 88.5 ℃ |
