位置:首页 > 品牌 > Sigma-Aldrich >

Poly(butyl methacrylate)

品牌
Sigma-Aldrich
CAS
9003-63-8
货号
910716
规格纯度
free flow beads, Mw 211,000
参考价格
901.53 *本价格含增值税费
促销
数量
-+
产品介绍:

产品说明

一般描述

Additional Benefit:
Conventional high molecular weight poly(butyl methacrylate) easily forms a fused block that require mechanical force (such as hammering) to break it down into small particles before usage. This product was developed with an anti-blocking technology and comes in an easy-to-use, free flowing, bead form.

应用

Poly(butyl methacrylate) finds applications in various areas.
It may be used to study the photoluminescence in EuTFC embedded in Poly(butyl methacrylate) (PBMA) polymer films.
It has also been used for coatings, surface modification, solid state battery, silk screen inks, adhesives for plastic and aluminum, plasticizer for hard butyl methacrylate resins, and for improving outdoor durability of vinyl chloride resins in pigmented lacquers.

制备说明

How to Prepare Solutions:
This polymer dissolves at room temperature but requires constant agitation to prevent solvent-swollen granules of polymer from forming agglomerates and sticking to the walls of the vessel.
Important: The polymer beads should be sifted directly into the vortex of the stirred solvent to speed wetting-out and dispersion. Continuous low-shear agitation for periods of 1-12 hours, depending on the grade and concentration of resin, is recommended.
After the solution appears clear in the tank, a sample should be spread out on a Leneta card or glass. After the solvent evaporates and a film forms on the card or glass, there should not be any resin seeds. If there are any seeds, the tank should be agitated further to fully dissolve the resin. Tank agitation should not be stopped (except for sampling) until the film test indicates there are no resin seeds. Any cloudiness or residue may indicate that some polymer remains undissolved. The presence of water in the system can also cause cloudiness.
Solution time can be reduced by heating; most common solvents can be heated to approximately 49℃ (120°F) without the need for reflux equipment. High-shear agitation also cuts dissolving time, but requires care to avoid overheating and excessive solvent loss.

基本信息

线性分子式(C8H14O2)n

产品性质

描述Brookfield Viscosity in 40% toluene: 500-800 cPs
Glass transition temperature onset: 20 ℃
Maximum % Moisture: 0.30%
形式solid (bead)
分子量Mw 211,000
折射率n/D 1.483
密度1.07 g/mL at 25 ℃ (lit.)
InChI1S/C8H14O2/c1-4-5-6-10-8(9)7(2)3/h2,4-6H2,1,3H3
InChI keySOGAXMICEFXMKE-UHFFFAOYSA-N

安全信息

象形图GHS07
警示用语:Warning
危险声明H317
预防措施声明P261 - P272 - P280 - P302 + P352 - P333 + P313 - P362 + P364
危险分类Skin Sens. 1
储存分类代码11 - Combustible Solids
WGKWGK 3
闪点(F)Not applicable
闪点(C)Not applicable

Sigma-Aldrich

推荐产品
| 首页 | 联系我们 | 会员服务 | 广告服务 | 友情链接 |
版权所有 CopyRight © 2008-2024 粤ICP备08119708号