产品说明
包装
100 mg in glass insert
制备说明
Electric Arc Discharge Method
Procedure for dispersion of this PEG-functionalized SWNTs product in water:
Typically after this procedure, the material is completely dispersed according to visual observation.
Sonicate 50 mg of material in 5 mL water for 30 min. (A bath sonicator with a sonic power between 45 W and 270 W works fine. A sonic power of 270 W is preferable for faster dispersion).
Add 45 mL of water and sonicate for additional 60 min (or until the material appears well-dispersed).
Dilute the dispersion to the desired concentration and sonicate if necessary. If aggregates are still visible continue to sonicate until satisfactory dispersion is obtained. Note: If unable to achieve a satisfactory dispersion, reduce the initial amount of 50 mg of material in 5 mL of water.
This procedure is to be used as a basis and additional procedures can be researched. Results may vary if this is the first time working with this material. Solubility of this PEG-functionalized SWNTs product can reach 5.0 mg/mL in water.
分析说明
按 Nano Letters, 2003, 3(3), 309-314 中所述测定含碳量。
基本信息
| MDL编号 | MFCD07370656 |
| NACRES | NA.23 |
产品性质
| 质量水平 | 100 |
| 测定 | >80% carbon basis |
| 形式 | powder |
| 分子量 | Mw ~600 g/mol (PEG) |
| 直径 × 长度 | 4-5 nm × 0.5-0.6 μm , bundle dimensions |
| 杂质 | 4-5% trace metals |
| 溶解性 | H2O: 5 mg/mL |
| 官能团 | PEG |
安全信息
| 象形图 |  |
| 警示用语： | Warning |
| 危险声明 | H319 - H335 |
| 预防措施声明 | P305 + P351 + P338 |
| 危险分类 | Eye Irrit. 2 - STOT SE 3 |
| 靶器官 | Respiratory system |
| 储存分类代码 | 11 - Combustible Solids |
| WGK | WGK 3 |
| 闪点(F) | Not applicable |
| 闪点(C) | Not applicable |
| 个人防护装备 | dust mask type N95 (US), Eyeshields, Gloves |
