产品介绍：
产品说明
一般描述
Monumental Evolution architectural 3D printing filament
- Developed specifically for architecture, design and archeological fields.
- Polymers are mixed with marble powders to realize architectural objects with ease.
- Suitable for outdoor use. The new Monumental Evolution is tougher, UV resistant and with less warping.
- Polish your objects with fine sandpaper and water. No more support-removing problems.
Material Properties
- Density: 1.14 g/cm3
- Tensile strength at yield: 428 kg/cm2
- Flexural modulus: 20500 kg/cm2
- IZOD impact strength at 23℃: 41 kg·cm/cm
- IZOD impact strength at -30℃: 5.5 kg·cm/cm
- Heat deflection: 100 ℃
- Vicat softening temperature: 96 ℃
应用
Monumental Evolution 3D Printing Parameters
- Extruder (nozzle) temperature: 240 +/- 10 ℃
- Bed temperature: 100 +/- 10 ℃
- Print speed: 60-70 mm/s
- Fan: 0-25 %
- Minimum nozzle diameter: 0.35 mm
- Plate materials: blue tape, kapton tape, etc.
产品性质
| 直径 | 1.75 mm |
| 重量 | 750 geach |
安全信息
| 储存分类代码 | 11 - Combustible Solids |
| WGK | WGK 3 |
| 闪点(F) | Not applicable |
| 闪点(C) | Not applicable |
