产品介绍：
产品说明
一般描述
TPU Flexible 3D Printing Filament
- TPUs are highly resistant to chemical agents, wear-proof and have good elastic comeback.
- Flexmark 7 = 70 Shore A, the most flexible, but it requires a precise calibration of the printer.
- Flexmark 8 = 80 Shore A, a good mixture of flexibility and stiffness and easier to print.
- Flexmark 9 = 90 Shore A, the stiffest of all the Flexs and lets you print as usual.
Material Properties
- Density: 1.2 g/cm3
- Hardness: 70 sh/A
- Elongation at break: 750%
- Tensile strain: 40 MPa
- Compression set at 70 ℃: 35%
- Charpy Impact at 23 ℃: No break
- Charpy Impact at -30 ℃: No break
- Abrasion loss: 42 mm3
应用
Flexmark 7 TPU 3D Printing Parameters
- Extruder (nozzle) temperature: 225 +/-10 ℃
- Bed temperature: cold to 45 ℃
- Print speed: 10-20 mm/s
- Fan: 0-50 %
- Minimum nozzle diameter: 0.3 mm
- Plate materials: glass, blue tape, kapton tape, etc.
产品性质
| 直径 | 1.75 mm |
| 重量 | 500 geach |
安全信息
| 储存分类代码 | 11 - Combustible Solids |
| WGK | WGK 3 |
| 闪点(F) | Not applicable |
| 闪点(C) | Not applicable |
