位置:首页 > 品牌 > Sigma-Aldrich >

Flexmark 9 TPU flexible 3D printing filament

品牌
Sigma-Aldrich
货号
TRD3D0046
规格纯度
signal white, diam. 1.75 mm
参考价格
403.81 *本价格含增值税费
促销
数量
-+
产品介绍:

产品说明

一般描述

TPU Flexible 3D Printing Filament

  • TPUs are highly resistant to chemical agents, wear-proof and have good elastic comeback.
  • Flexmark 7 = 70 Shore A, the most flexible, but it requires a precise calibration of the printer.
  • Flexmark 8 = 80 Shore A, a good mixture of flexibility and stiffness and easier to print.
  • Flexmark 9 = 90 Shore A, the stiffest of all the Flexs and lets you print as usual.

Material Properties
  • Density: 1.24 g/cm3
  • Hardness: 93 sh/A
  • Elongation at break: 600%
  • Tensile strain: 55 MPa
  • Compression set at 70 ℃: 45%
  • Charpy Impact at 23 ℃: No break
  • Charpy Impact at -30 ℃: No break
  • Abrasion loss: 30 mm3

应用

Flexmark 9 TPU 3D Printing Parameters

  • Extruder (nozzle) temperature: 225 +/-10 ℃
  • Bed temperature: cold to 45 ℃
  • Print speed: 25-35 mm/s
  • Fan: 0-50 %
  • Minimum nozzle diameter: 0.3 mm
  • Plate materials: glass, blue tape, kapton tape, etc.

产品性质

直径1.75 mm
重量500 geach

安全信息

储存分类代码11 - Combustible Solids
WGKWGK 3
闪点(F)Not applicable
闪点(C)Not applicable

Sigma-Aldrich

推荐产品
| 首页 | 联系我们 | 会员服务 | 广告服务 | 友情链接 |
版权所有 CopyRight © 2008-2024 粤ICP备08119708号