位置:首页 > 品牌 > Sigma-Aldrich >

Millistak+® HC Pro Pod Depth Filter

品牌
Millipore
货号
MX0HC10FS1
规格纯度
X0HC, cellulose, filtration area 1.1 m2, hydrophilic
参考价格
6718.98 *本价格含增值税费
促销
数量
-+
产品介绍:

产品说明

一般描述

Device Configuration: Pod

应用

Secondary clarification of bioreactor harvests, primarily for cell cultures

产品规格

Filter Grade: X0HC
Per 24 hour soak in 10 L pure water post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 100 L/m2 (10 L/ft2 ) of media surface area:
Sodium: <14.1 mg/ft2
Calcium: <5.3 mg/ft2
Magnesium: <3.9 mg/ft2
Mercury: <0.001mg/ft2
Chromium: ≤0.001 mg/ft2
Aluminum: <0.084 mg/ft2
Potassium: <4.2mg/ft2
Lead: <0.001 mg/ft2
Arsenic: <0.009mg/ft2
Cobalt: ≤0.001 mg/ft2
Iron: <0.064 mg/ft2
Manganese: ≤ 0.124 mg/ft2
Titanium: <0.002 mg/ft2
Zinc: <0.046 mg/ft2
Nickel: <0.013
Copper: <0.009

制备说明

Sterilization Method
1 autoclave cycle of 60 min @ 123 ºC

分析说明

Product Water Conductivity at 25℃: post autoclave (1 cycle of 60 minutes at 123 ℃) and pure water flush of 10 liters per ft2 (100 L/m2) of media surface area

法律信息

MILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, Germany

基本信息

eCl@ss32031690

产品性质

质量水平400
物料cellulose
filter aid (inorganic)
glass fiber-reinforced polypropylene
描述Secondary clarification of bioreactor harvests, primarily for cell cultures
特点hydrophilic
manufacturer/tradenameMillistak+®
参数1 bar max. differential pressure (15 psid) at 80 ℃ (Forward)
1 bar max. inlet pressure (15 psi) at 80 ℃
2.1 bar max. differential pressure (30 psid) at 25 ℃ (Forward)
2.1 bar max. differential pressure (30 psid) at 25 ℃ (Reverse)
3.5 bar max. inlet pressure (50 psi) at 25 ℃
高度32 cm (12.5 in.)
长度62 cm (24.2 in.)
过滤面积1.1 m2
杂质<0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
inputsample type liquid
电导率19.34-53.2 μS/cm at 25 ℃ (product water)
filter gradeX0HC

安全信息

储存分类代码13 - Non Combustible Solids
WGKnwg
闪点(F)Not applicable
闪点(C)Not applicable

Sigma-Aldrich

推荐产品
| 首页 | 联系我们 | 会员服务 | 广告服务 | 友情链接 |
版权所有 CopyRight © 2008-2024 粤ICP备08119708号