位置:首页 > 品牌 > Sigma-Aldrich >

Polygard® CN Cartridge Filter

Polygard-CN 筒式过滤器 10 in.2.5 μm F 号 乙丙橡胶

品牌
Millipore
货号
CN25F1E06
规格纯度
pore size 30.0 μm, cartridge nominal length 10 in. (25 cm), Code F (double open end w/flat gaskets)
参考价格
4560.68 *本价格含增值税费
促销
数量
-+
产品介绍:

产品说明

一般描述

Device Configuration: Cartridge

制备说明

Sterilization Method
10 autoclave cycles or SIP @ 126 °C for 30 min
Sanitization Protocol
30 min with hot water @ 80 °C

分析说明

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥5 L
Gravimetric Extractables: after 24-h soak in water

其他说明

Directions for Use

  • Organism Retention: Microorganism reduction
  • Mode of Action: Filtration (nominal)
  • Application: BioProcessing
  • Intended Use: Efficient particle and microorganism reduction
  • Instructions for Use: Please refer to the Polygard® and CLARIGARD® Cartridges user guide
  • Storage Statement: Store in dry location
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

法律信息

CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

基本信息

eCl@ss32031690

产品性质

物料EPR seal
polypropylene
质量水平400
特点hydrophilic
manufacturer/tradenamePolygard
参数4.8 bar max. differential pressure (70 psid) at 25 ℃
4.8 bar max. inlet pressure (70 psi) at 25 ℃
cartridge nominal length10 in. (25 cm)
直径7.0 cm (2.75 in.)
过滤面积0.42 m2
杂质≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
gravimetric extractables≤50 mg
孔径30.0 μm nominal pore size
30.0 μm pore size
inputsample type liquid
cartridge codeCode F (double open end w/flat gaskets)

Sigma-Aldrich

推荐产品
| 首页 | 联系我们 | 会员服务 | 广告服务 | 友情链接 |
版权所有 CopyRight © 2008-2024 粤ICP备08119708号